Mitrek Prints &
Other Goodies
I hope that all will find the following
information useful...
At last check the manual for the Mitrek Low-Band radio was out of stock, and
reprints will not be available from /\/\other
Blue. All information taken from Manual number 68P81045E65-0.
The following information and prints concern both the 60 watt and 110 watt
versions of the 29.7 - 50 MHz versions.
More to be added as I can find the time... or specific requests are made
Complete Mitrek
Low-Band Manual in PDF Format
CAUTION!! this file is over 15MB in size!
Mitrek PL Encode - Decode Board Schematic in PDF
Format
Mitrek
Digital PL Encode - Decode Board Schematic in PDF Format
Mitrek Digital PL Two-Code Adapter Board Schematic in PDF
Format
Other goodies include..
Neat stuff for the Midland LMR series of
radio
Selectone ST-803
DTMF Encoder.pdf - 1,524kb
70-2919 Reverse Burst
CTCSS.pdf - 967kb
Instructions
for installing the 70-2102C tone squelch board into a Midland Syntech-I radio.
Instructions
for installing the 70-2157 tone squelch board into a Midland XTR radio.
Windoz based software for the
Midland - SYN-II and XTR radios using the 70-1308A programming cable. That is
correct.... no more DOS-based nightmare. This software runs fine in XP as well,
I have yet to find any issues.
XTR Handheld
Programmer 70-1022-3.5.zip DOS based software
Alignment instructions for the
Syntech - XTR
Complete manuals.. CAUTION - These are
large files!!
Midland
70-050 70-055 service manual.pdf - 2,198kb
Midland Syntech
Operators Manual.pdf - 348kb
Syn-II
Service Manual Part 1_70-340381.pdf - 3,972kb
Syn-II
Part 2 Control Heads Manual No 70_340383.pdf - 2,336kb
Syn-II
Part 3 Transmitters Manual No 70_340380.pdf - 20,641kb
RF Board
Schematic 70-3400 & 3800.pdf - 41,269kb
Synthesized
8 channel TX OP Manual 70-999977.pdf - 233kb
Service
Manual 70-1526 A & B 70-152600.pdf - 9,118kb
Midland 70-1000
Operators Manual.pdf - 2,049kb
Midland 70-1000
Service Manual.pdf - 1,281kb
Generic Amatuer Radio related
tools
Amateur Service
Rules in PDF format.
BDS Good for distance and bearing
calcs... lot's of other things as well.
RFS Tools... also an
interesting tool suite..
73's de K5JMP
|